Square Steam Stopper
To fit 800 x 800mm, 900 x 900mm or 1m x 1m square showers whether installed in a corner or alcove.

A Square Steam Stopper will:

• • Stop Steam from being made in your shower.
  • Make your paint last longer
  • Stop your mirror from misting
  • Pealing paint is a thing of the past
  • Reduce the cleaning of your bathroom
  • Stop Mould from growing
  • Save power

SELECT YOUR STEAMSTOPPER BELOW
That is the same size or slightly bigger than your square shower.

The Steam Stopper Bath Dome is designed to fit all Shower over baths that are about 1675mm long x 760mm wide.

The Bath Dome Steam Stopper will:

♦ Stop Steam from being made in your shower.
♦ Stop Mould from growing in your bathroom
♦ Stop your mirror from misting
♦ Stop pealing paint
♦ Make your paint last longer
♦ Reduce the cleaning of your bathroom
♦ Save power
Once you have installed the support rails on the back and ends you then need to trim your Bath Steam Stopper to size. I would recommend trimming to length first, once that is done you can slide it into place to mark the width and trim to suit. Once done slide the Bath Dome Steam Stopper into place and the job is completed.

*Please note* 
The BathDome will only work if you have a fully enclosed shower similar to what you see on this page
ALL Bath Steam Stoppers will be supplied cut to 1680mm x 800mm, the edges will need to be trimmed to size to suit your shower.  cutting instructions here.

The 45 Degree Steam Stopper is suitable for most 1m x 1m and 900mm x 900mm 45deg corner shower cubicles, many of these 45 deg showers are up to 20 years old but the Steam Stopper will still fit once you have trimmed the edges to suit.

The 45 Degree Steam Stopper is also known as a Pentagon Steam Stopper and Angle Corner Steam Stopper

The 45 Degree Steam Stopper will:

• Stop Steam from being made in your shower
• Make your paint last longer
• Stop Mould from growing
• Reduce the cleaning of your bathroom
• Stop your mirror from misting
• Pealing Paint is a thing of the past
• Save power
• Save hot Water

*Please note* ALL 45 Degree Steam Stopper will be supplied cut to 995mm x 995mm, (the dome as such is 810mm x 810mm) and the outer edges will need to be trimmed to size to suit your shower.  cutting instructions here.

Click on the size below that suits your shower

The Curved Steam Stopper is suitable for most 1m x 1m and 900mm x 900mm Curved corner shower cubicles.

This Curved Steam Stopper will:

• Stop Steam from being made in your shower
• Stop your mirror from misting
• Make your paint last longer
• Pealing paint is a thing of the past
• Reduce the cleaning of your bathroom
• Stop Mould from growing
• Save power

Click on the size below that suits your shower