45 Degree Steam Stopper
$299.00
The 45 Degree Steam Stopper is suitable for most 1m x 1m and 900mm x 900mm 45deg corner shower cubicles, many of these 45 deg showers are up to 20 years old but the Steam Stopper will still fit once you have trimmed the edges to suit.
The 45 Degree Steam Stopper is also known as a Pentagon Steam Stopper and Angle Corner Steam Stopper
The 45 Degree Steam Stopper will:
- Stop Steam from being made in your shower
- Make your paint last longer
- Stop Mould from growing
- Reduce the cleaning of your bathroom
- Stop your mirror from misting
- Pealing Paint is a thing of the past
- Save power
- Save hot Water
*Please note* ALL 45 Degree Steam Stopper will be supplied cut to 995mm x 995mm, (the dome as such is 810mm x 810mm) and the outer edges will need to be trimmed to size to suit your shower. cutting instructions here.
These are showers we know the 45 deg Steam Stopper fits. There maybe other showers in houses we have not been able to check. For you to check, measure the 2 back walls from the back corner to the front edge of your door frame. If it is 840mm or bigger a 45 deg Steam Stopper will fit.
2 Wall Corner | |||
Athena | Charisma | ||
|
|||
Clearlite | Millennium, Platinum Sierra |
||
|
|||
EngleField | Valencia | ||
|
|||
Henry Brooks | 1m x 1m and 900 x 900mm |
||
|
|||
Newline | Danube Marbella Saturn Trent |
||
|
|||
Plumbing World | Oceania 905 x 905mm Oceania 955mm x 955mm |
||
|
Once you have installed the support brackets (as per instructions) you then need to trim your Steam Stopper to size, I would recommend trimming the back edges first, once the back edges are cut and fit parallel to your walls place the 45 Deg Steam Stopper on the top of the shower and mark around the front edge then cut 3 – 5mm inside your marks, fit the Steam Stopper and the the job is completed.
45 Degree Steam Stoppers are not trimmed to sizeThere are many variations of corner angled showers this Steam Stopper is large enough to cover most. *Please note*ALL 45 Degree Steam Stoppers will be supplied cut to 995mm x 995mm, (the dome as such is 810mm x 810mm) and the outer edges will need to be trimmed to size to suit your shower. cutting instructions here. Click on the image below for a larger version to print and take into your chosen supplier. |
Recap
45 Degree Steam Stopper Recap:
- Dome size 810 x 810mm
- Minimum Overall cut size 840 x 840mm
- No Std pre-cut Sizes
- Untrimmed size 995 x 995mm